[s-cars] Poll: Who's using a 1.8T coil conversion

W. Bean theringmeister at triad.rr.com
Tue Dec 28 16:18:29 PST 2010


Hey Steve. It was in my original question, but I actually did change plugs to NGK coppers from iridiums trying to see if the lower voltage needed to produce spark in the coppers would cure the issue (still thinking it was weak coils), but it didn't. I've run the output tests and all things function as they should, including the WGFV. The only things I haven't touched is the EGR and PCV valves.  They're original. I'm wondering if there's a vacuum leak in the line to the MAP sensor or if my car is just one of those that doesn't like the updated coils of any variety and I need to go back to stock.

    


---- Steve Mills <s.b.mills at gmail.com> wrote: 
> What about plugs? Seems like you've changed everything else.
> 
> On Tue, Dec 28, 2010 at 6:48 PM, Wylie Bean <theringmeister at triad.rr.com>wrote:
> 
> > I haven't seen any pattern whatsoever. I've tried to think of any
> > commonality and can't. I've replaced the bypass valve with a new 710N,
> > checked the wastegate diaphragm for proper vacuum and operation with a hand
> > pump, and there are no codes whatsoever.  Everything leads me to the coils,
> > wiring loom (flaky ground or other connection?) or injectors, which I
> > haven't touched.
> > ------Original Message------
> > From: Robert Myers
> > To: theringmeister at triad.rr.com
> > Subject: Re: [s-cars] Poll: Who's using a 1.8T coil conversion
> > Sent: Dec 28, 2010 6:22 PM
> >
> >
> > Wylie,
> >
> > Are you seeing any patterns developing? Might I
> > be better off using coils other than the 1.8t coils currently in use?
> >
> > Bob
> >
> >
> > At 02:22 PM 12/28/2010, you wrote:
> > >*This message was transferred with a trial version of CommuniGate(r) Pro*
> > >I have the Apikol loom and started with 5 brand
> > >new 1.8T coils.  Prior to the switch I had an
> > >annoying random hiccup under load (light or
> > >heavy) that I cannot reproduce at idle and that
> > >is still present. Car is stock save for a
> > >Stromung exhaust. I have replaced plugs, FPR,
> > >iggy switch. My question is how many of you are
> > >running the Apikol or home made loom with
> > >updated coils with success, and which coils are you using (V8, 2.0T,
> > other?)
> > >
> > >
> > >Wylie Bean
> > >TheRingmeister at triad.rr.com
> > >90 cq
> > >91 90q20v
> > >92 UrS4
> > >08 Q7 3.6
> > >via BlackBerry®
> > >_______________________________________________
> > >S-CAR-List mailing list
> > >http://audifans.com/mailman/listinfo/s-car-list
> > >http://www.audifans.com/kb/List_information
> > >
> > >
> > >-----
> > >No virus found in this message.
> > >Checked by AVG - www.avg.com
> > >Version: 10.0.1191 / Virus Database: 1435/3344 - Release Date: 12/28/10
> >
> >
> >
> > Wylie Bean
> > TheRingmeister at triad.rr.com
> > 90 cq
> > 91 90q20v
> > 92 UrS4
> > 08 Q7 3.6
> > via BlackBerry®
> > _______________________________________________
> > S-CAR-List mailing list
> > http://audifans.com/mailman/listinfo/s-car-list
> > http://www.audifans.com/kb/List_information
> >

--
Wylie Bean
TheRingmeister at triad.rr.com
90 cq
91 90q20v sport
92 UrS4
08 Q7 3.6






More information about the S-CAR-List mailing list