[s-cars] Clutch slave dilemma

[qshipq at aol.com]

 It's bolted in with a 8mm (13mm wrench) bolt.  It's not easy to get up there without driveshaft/heat shield removal, but it certainly can be done on the car, on the ground.  Loosen the line first, then go at the retaining bolt.  There is a recess where the bolt hole is lined up, if it's not aligned you can strip the threads in the trans, btst.

HTH

Scott J

 


 

 

-----Original Message-----
From: Mike Platt <mplatt911 at yahoo.com>
To: Steve Mills <s.b.mills at gmail.com>
Cc: s-car-list at audifans.com
Sent: Mon, Feb 14, 2011 6:31 pm
Subject: Re: [s-cars] Clutch slave dilemma


thanks for all the replies folks! Still need to know how to change the slave ON 

THE CAR.
>...