[s-cars] Oil Temp Gauge Fail

[Steve Mills]

It's probably not the sender or the gauge.

There's a known problem on S6's that the pin in the aux cluster that
carries the signal to the gauge isn't soldered properly and that connection
fails. I've had to fix it on every S6 I've owned.

You'll need to pull the instrument cluster, remove the aux cluster,
and disassemble it to get access to the circuit board, but it's a free fix
from a parts standpoint.

Steve

On Wed, Jun 13, 2012 at 9:48 PM, Tony Curran <tony.curran at sympatico.ca>wrote:

> Hi All,
>
>
>
> Today the oil temp gauge stopped indicating temperature. All other gauges
> are just fine. I'm assuming that itss most likely the sender 035 919 521 B
> that's located on the oil pump - found here.
>
>
>
> http://forums.quattroworld.com/s4s6/msgs/93029.phtml
>
>
>
> Are there any other likely sources for this failure before I order part
> from
> local dealer?
>
>
>
> Thanks.
>
>
>
> Tony
>
> 96 S6
>
>
>
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
>