[s-cars] S6 instrument cluster - dead buzzer
Kirby Smith
kirbyasmith at gwi.net
Mon Feb 11 13:09:52 PST 2013
OK, got one. Car is due for some work, so maybe I'll have
Tim install it while the car is sitting at NEA.
Thanks again Stott.
kirby
On 02/08/2013 02:26 PM, Stott Hare wrote:
> Red/Black pair of wires w/the large white connector was my solution for
> getting the V1 remote display control button out of the cluster. Installed
> a momentary no/pc button into the underside of the cluster lower trim piece.
> Pictures are of the stock speaker that we were trying to replace. RS was
> same diameter, clipped back in and just needed it's wires soldered in, vs
> the pins on the stock speaker. Looks like most of the RS stores within
> 50miles of Portland have the bugger in stock for $4.
>
> http://www.radioshack.com/product/index.jsp?productId=2062406#tabsetBasic
>
> Description still reads "wired" but the RS photo link above doesn't really
> show any wires...
>
> -----Original Message-----
> From: Kirby Smith [mailto:kirbyasmith at gwi.net]
> Sent: Friday, February 08, 2013 1:53 PM
> To: stott at gwi.net
> Subject: Re: [s-cars] S6 instrument cluster - dead buzzer
>
> Thank you very much!
>
> In your case it is clear that you remounted to the circuit board. The
> Digikey sourced speaker that Fred was considering (I'm not sure I've seen a
> message indicating
> completion) is larger and would have to be mounted somewhere else with wires
> (and connector) to the PWB.
>
> In picture 1 of 3, are the orange and black wires in any way related to the
> speaker, or are they your V1 reference?
>
> Are the pictures of the Audi part or the Radio Shack part?
>
> kirby
>
> On 02/08/2013 12:56 PM, Stott Hare wrote:
>> The more it dig through the memory banks, I'm pretty sure the RS
>> speaker had 22g or some similarly small wires, which I stripped and
>> routed appropriately, before soldering back into the circuit board.
>>
>> -----Original Message-----
>> From: Kirby Smith [mailto:kirbyasmith at gwi.net]
>> Sent: Friday, February 08, 2013 12:36 PM
>> To: stott at gwi.net
>> Subject: Re: [s-cars] S6 instrument cluster - dead buzzer
>>
>> Stott:
>>
>> I did find those messages, although in an earlier search I thought
>> there were a bunch centered around Bob Rossato, but I couldn't find them
> today.
>>
>> Anyway, the speaker that Fred Munro was referencing from Digikey still
>> exists, so I can easily use it. But I am curious whether youall
>> mounted the speaker, or attached it somewhere else and ran wires to the
> circuit board.
>>
>> Please send me any photos you have.
>>
>> Thanks for your quick response
>>
>> kirby
>>
>>
>>
>> On 02/08/2013 12:26 PM, Stott Hare wrote:
>>> This is what I was able to dig out from my dusty sent box. I still
>>> have some photos as well, if you want to email me, I'll send them
>>> direct. Or if the librarian wants them..
>>>
>>> -Stott
>>>
>>>
>> <snip>
>>
>>
>
>
More information about the S-CAR-List
mailing list