[s-cars] UrS4 fuel line fitting
Tom Green
trgreen at comcast.net
Mon Nov 16 20:12:38 PST 2015
Konstantine,
I have done a lot of searching but have never found fuel line fittings in the format needed to fit the fuel line
connections. There is a lot of information about repairing fuel lines in the Quattroworld.com forum for UrS4/6
and RS2/S2 vehicles including some repairs offered by Mance Etheridge (VAP) a few years ago. I am not a
fan of the repairs that used screw down clamps though, regardless of who qualified them for injector pressure use.
I think your needs can best be met using Mike’s suggestion to tap the rail somewhere and directly mount the
gauge.
I have not heard from you recently (years?). Good to hear you are still in the hunt.
Tom
95 S6 Knoxville, TN
> On Nov 16, 2015, at 3:00 PM, Konstantine Bogach <kbogach at comcast.net> wrote:
> Hi All,
>
> any one knows what is the flare type/angle at the fuel line fitting at
> hard tube to braided hose connection at firewall? It is 14x1.5 thread,
> but I am not sure of the flare type.
> I want to fit a fuel pressure gauge close to the rail somewhere. I
> would really appreciate let me know about a proven setups.
> Another option to use my CIS fuel pressure tester which has 12x1.5mm
> female ends. But I can't to find adapters from 14x1.5 mm to 12x1.5
> mm. Any help will be greatly appreciated.
>
> Thank you.
> Konstantine.
> UrS4 ’93.
More information about the S-CAR-List
mailing list