[s-cars] UrS4 fuel line fitting

[Konstantine Bogach]

Hi Tom,
it was many years.  After I had to take job in NYC my free time shrunk 
to nothing.   My S4 was good to me but I  neglected it to some degree.  
I will try to catch up.  As always did,  I hope on the list help.  I 
even forgot what I learned years ago.
It is nice to see familiar names.

Konstantine
UrS4 '93

On 11/16/2015 11:12 PM, Tom Green wrote:
> Konstantine,
> I have done a lot of searching but have never found fuel line fittings in the format needed to fit the fuel line
> connections.  There is a lot of information about repairing fuel lines in the Quattroworld.com forum for UrS4/6
> and RS2/S2 vehicles including some repairs offered by Mance Etheridge (VAP) a few years ago.  I am not a
> fan of the repairs that used screw down clamps though, regardless of who qualified them for injector pressure use.
>
> I think your needs can best be met using Mike’s suggestion to tap the rail somewhere and directly mount the
> gauge.
>
> I have not heard from you recently (years?).  Good to hear you are still in the hunt.
>
> Tom
> 95 S6  Knoxville, TN
>
>> On Nov 16, 2015, at 3:00 PM, Konstantine Bogach <kbogach at comcast.net> wrote:
>> Hi All,
>>
>> any one knows what is the flare type/angle at the fuel line fitting at
>> hard tube to braided hose connection at firewall?  It is 14x1.5 thread,
>> but I am not sure of the flare type.
>> I want to fit a fuel pressure gauge close to the rail somewhere.  I
>> would really appreciate let me know about a proven setups.
>> Another option to use my CIS fuel pressure tester which has 12x1.5mm
>> female ends.   But I can't to find adapters from 14x1.5 mm to 12x1.5
>> mm.   Any help will be greatly appreciated.
>>
>> Thank you.
>> Konstantine.
>> UrS4 ’93.
>