[urq] EM removal

[James Howard]

Have a look here :-
http://homepage.ntlworld.com/jh.666/head.html
and
http://www.isham-research.com/quattro/urquattro_manifold.html
and
http://www.isham-research.com/quattro/i5_head.html

I removed / replaced the exhaust manifold when I replaced the head on my WR.
There's a list of part numbers and prices (for UK WR) there too.
The exhaiust manifold studs are not shouldered - that's some of the cam
cover studs.
You can leave the turbo oil lines attatched.

Jim.
----- Original Message ----- 
From: "Thatcher Hubbard" <personal at thatcherhubbard.com>
To: "ur-q @audifans" <urq at audifans.com>
Sent: Tuesday, June 01, 2004 10:24 PM
Subject: Re: [urq] EM removal


>    Okay, I'm going to go ahead an admit ignorance on what exactly
> "shouldered" is.  I just want to make sure I don't end up with 10 studs
> for shouldered nuts and 10 non-shouldered nuts.
>    So other than Jim's additions it seems like I have a reasonable parts
> list for the job?
>
> On Jun 1, 2004, at 3:13 PM, Jim Haseltine wrote:
>
> > Recently did the same job twice (1xMB, 1xWR in the same week, GBP900 in
> > manifolds).
> > You should be able to see the top nut at #1 so you can see if it's
> > shouldered.
> > Anyway:
> > 10x N 902 002 01 shouldered nut
> > 10x N 012 608 1 lock nut
> >
> > You should be able to reuse the original thick washers (N 900 955 01).
> >
> > Regards,
> >
> > Jim Haseltine
> >
> > ----- Original Message -----
> > From: "Thatcher Hubbard" <personal at thatcherhubbard.com>
> > To: "ur-q @audifans" <urq at audifans.com>
> > Sent: Tuesday, June 01, 2004 9:43 PM
> > Subject: [urq] EM removal
> >
> >
> >>    I've finally found the time and the location to do an EM
> >> removal/repair/replace on my '83 with a WX.  I know that at the very
> >> least I should need:
> >>
> >>    EM to head gaskets (x5)
> >>    EM to turbo gasket (x1)
> >>    EM to head studs (x10?)
> >>    IM gasket (x1)
> >>
> >>    How can I tell if I have shouldered or non-shouldered nuts from my
> >> EM
> >> studs?  I'd like to have all the parts I could reasonably expect to
> >> need on hand when I start tearing this thing apart.
> >>
> >> _______________________________________________
> >> Audifans urq mailing list
> >> Send posts to: mailto:urq at audifans.com
> >> Manage your list connection:
> >> http://www.audifans.com/mailman/listinfo/urq
> >> Have an urq question?  Check the Audifans Knowledgebase!
> >> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> >> Have an urq answer? ... Please help others by adding to the KB ... all
> > contributions welcome!
> >>
> >
> >
> >
> >
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!