[urq] Finally re-assembled engine and car...won't start

[Djdawson2 at aol.com]

Dennis is right.  The easiest way to check this... hook up a test light to 
the coil + and - sides.  It is only battery voltage.  Crank the engine over, and 
you should see the test light blink.  If not, reposition the distributor 
slightly and try again.  If you have a helper, it is pretty easy to have one 
person keep the car cranking while the other turns the distributor until you get 
the blinking from the test light.  Once you get the blinking, tighten down the 
distributor clamp and you should be good to go.
HTH,
Dave