[urq] Clutch slave cylinder retaining pin-removal?

[Bill Bennett]

yeah, use a punch on the end of a socket and socket extention with a flex 
joint and extention thru the left fender well where mr tie rod comes thru 
and MR hammer. works for me, should work for you, you have the tools,
----- Original Message ----- 
From: "Jon Archibald" <urquattro at comcast.net>
To: <urq at audifans.com>
Sent: Sunday, May 08, 2005 12:38 PM
Subject: [urq] Clutch slave cylinder retaining pin-removal?


> Any tips on how to knock this pin out with tranny "in car" for S/C
> replacement? I'm finding it exceptionally hard to simply "drive it out" 
> per
> Bentley. Mostly because of the tough angles involved...Any BTDT?
> TIA,
> Jon
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all 
> contributions welcome!