[urq] Brake Master Cylinder P/N 443~447 611 021

[Pasqualoni, James E]

1. I used the new cap that came with the new reservoir, as the rubber sleeve
seemed to provide some protection from the elements.  I just used crimp
connectors to hook into the wires.
2. I don't know if there is any difference between the two cap level
sensors.

HTH,
Jim

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of Maurits Jonkergouw
Sent: Friday, May 20, 2005 3:24 PM
To: Audifans
Subject: Re: [urq] Brake Master Cylinder P/N 443~447 611 021


But what about the "old" cap for the reservoir with fluid level sensor (443 
611 349)? Does it fit that 200 reservoir (443 611 301 B).
If it doesn't, and the 200 cap (443 611 349 A) is mandatory, how to fix the 
difference in terminal pin housing and rubber protective cap, i.e. they look

very different to me in ETKA. Just cut the old wire terminals off and crimp 
on new headers/terminal which matches the new terminal pin housing?

Q1. Do you exactly know the difference between the URQs and 200s reservoir, 
the P/N difference is only the "B".
Q2. Do you exactly know the difference between the URQs and 200s cap and 
level sensor, the P/N difference is only "A" (the terminal?)

...unless you mean you will have to swap the early model VIN >> C reservoir 
(431 611 301 A) and matching cap (431 611 351 A)

Thanks.

Regards,
Maurits

1986 GV (Swiss WR)
1985 CGT KV
1982 GL DD


----- Original Message ----- 
From: "Pasqualoni, James E" <james.pasqualoni at gs.com>
To: "'Brandon Rogers'" <brogers at terrix.com>; "Urq List" <urq at audifans.com>
Sent: Friday, May 20, 2005 6:25 PM
Subject: RE: [urq] Brake Master Cylinder P/N 443~447 611 021


Straight swap, you'll just need to use the reservoir from the 200.



_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!