[urq] Front/Rear Suspension Updates

[Renneisen, Eric 475]

Martin wrote:
> It's a bolt on application if you upgrade the swaybar f/r to newer
style.
> Newer swaybar is needed to work with newer control arms.

Careful here...  The B3 CQ came with two types of suspension setup.  
The early '90 cars had stamped arms and front swaybar like the later 
urq (and no rear bar).  The later CQ got cast arms and F/R swaybars 
linked to the strut.  So, "newer" swaybar terminology might get 
confusing.

I presume you're talking about using the early CQ stamped arms that 
have a provision for the swaybar link bushing.  I *think* the cast arms 
don't have the required hole.

Eric R.
'86 urq
'93 S4

------------------------------------------------------------------------------
CONFIDENTIALITY NOTICE: If you have received this email in error, please immediately notify the sender by e-mail at the address shown.  This email transmission may contain confidential information.  This information is intended only for the use of the individual(s) or entity to whom it is intended even if addressed incorrectly.  Please delete it from your files if you are not the intended recipient.  Thank you for your compliance.  Copyright 2006 CIGNA
==============================================================================