[urq] Can't get Gobi runnin'

[Jim Miller]

I know many of you guys on this list have BTDT with most of my urq questions/problems and I'm always grateful that you all take the time to help! 
Well, here I am again with a CAR DOES NOT START issue. I have gone through all the troubleshooting procedures/sequence and basic engine conditions to be checked according to the Introductory Service Training Information (Maintenance and Adjustments) manual. It has come in handy before but, it seems, that all tests point to the ECU. I still can't believe it (I double-checked everything). I used my spare coil and ignition control unit. I even pulled a plug wire and attached it to a spark detector cranked the engine... no spark. The only other thing I discovered was that the coil wire resistance measured 2200 ohms and the manual has it at 800 to 1200. 
Any help would be appreciated!!!
Jim Miller
'83 urq