[urq] 91 200 Trans

[Brandon Rogers]

Rob and Mike have good points.  I personally like the ratios on the 84+
tranny. Whereas the earlier trannies have a gap in the gearing between 2nd
and 3rd I believe.  And yes you will want a 4kq rear diff if you use the 200
tranny.

Brandon

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of Jack Walker
Sent: Friday, August 14, 2009 12:18 PM
To: urq at audifans.com
Subject: [urq] 91 200 Trans


So I've been planning on just using the original 83 UrQ trans and
differential with my AAN motor.

I'm so close to actually getting this portion of the project done..hopefully
soon!

 

So am I correct..if I use the UrQ trans there isn't anything I need to do to
make the speedo work. RIGHT?

 

Understand there is some notching necessary to the UrQ trans bell housing,
someone pointed me to some instructions once; but they weren't very clear or
I couldn't wrap my head around it completely?? I can't find the info.. 

Would appreciate a resend or anyone else's help?

 

When switching to the 91 200 Trans is it necessary to also switch the
differential from the 91.I've got both available.

But my biggest question is why switch from a UrQ trans, for the different
gearing of the 91 which is 4:11 VS the UrQ of something like 3:89.? In my
case I'm not specially looking for off the line acceleration, which in my
mind would be the 4:11 advantages (but there might be other ads as well?).

 

Jack Walker

_______________________________________________
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
http://www.audifans.com/kb/List_information

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/