[urq] UrQ ref sensor

[Keith Lloyd]

 I too have same problem on a spare gearbox I have. Sensor will rotate a bit 
but will not come out. There must be an easy way????????

any suggestions gratefully received

Keith
'87 WR
----- Original Message ----- 
From: "Mike Del Tergo" <mdeltergo at hotmail.com>
To: <urq at audifans.com>
Sent: Monday, September 07, 2009 9:02 PM
Subject: [urq] UrQ ref sensor



Does any one on the northeast have a known good one that I could borrow to 
trouble shoot my no start?  I tried to swap the bell housing unit for the 
block unit and might have run into the same issues Louis-Alain did.  My 
known good unit (bell housing) just freely rotates 1/8 turn in each 
direction pull will not pull out of the housing even with lots of PB Blaster 
(undoutedly now running into the sender and killing it!) and a pair of 
pliers gently tugging on it.  block unit came out like proverbial butter.

thx

Mike

_________________________________________________________________
Windows Live: Make it easier for your friends to see what you’re up to on 
Facebook.
http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON:WL:en-US:SI_SB_facebook:082009
_______________________________________________
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
http://www.audifans.com/kb/List_information

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/