[urq] Brake Lights

[JP Chaplen]

For the blinkers, I just added one of the LED relays, its just trying to
find the right one to use, but that's another way of doing it.

Ok, wait let me confirm what you also said below, you said you have the dual
holder but you used a single 1156 bulb? Then parking or brake they would
just be on?

If you ended up putting back in the OE 1156 (one for brake and one for
parking single filament) then each side (same holder) should light up
independently.

At least that's what I'm getting from your statement?

But the bottom 2 red sections are Early OE=1 is brake other is parking - vs
later is 1157 (high and Low) with both been parking and both being brake. 


JP

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of Bob
Sent: Saturday, December 04, 2010 3:11 PM
To: Steve Buchholz
Cc: Urq list
Subject: Re: [urq] Brake Lights

thanks for all the suggestions guys (and the offer Steven  *cough*) :)

I did check grounds and actually do have the tabs individually grounded. 
Thinking about the problem though... I put in LED's for bulbs which 
makes life NICE, but to get the blinker to blink correctly I had to add 
a 25 ohm load resistor on each side. Im wondering if that might be 
messing with me. Ill try experimenting with that tomorrow and report back.

Bob

On 12/4/2010 12:56 PM, Steve Buchholz wrote:
> The dual filaments rears work great on my car, how about we trade?  :-)
>
> It sounds like you're getting no ground.  The brake lights are getting 
> ground through the marker bulbs.  You might actually see them light 
> dimly when the brakes are on.
>
> I'd recommend that you add a ground wire from the lug on each dual 
> filament plate to one of the mounting studs.  You will likely find 
> this makes the brakes and all the other lights brighter.
>
> Steven Buchholz (mobile)
>
> ----- Reply message -----
> From: "Bob" <bob at maxboostracing.com>
> Date: Sat, Dec 4, 2010 6:55 am
> Subject: [urq] Brake Lights
> To: "Urq list" <urq at audifans.com>
>
> I just noticed something on my 85.
> My brake lights work fine on the car, that is until I have the parking
> lights on. When I have the parking lights on, the bottom 2 bulbs light
> up, which should be my brake lights. And when I hit the brakes, they
> dont change.  A long time ago I changed to the dual element bulb
> holders, but never put in dual element bulbs, I thought that was it, so
> I put the OE holders in again, and it still does it. What am I missing?
> bob
>
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
>
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
>
>
>
_______________________________________________
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
http://www.audifans.com/kb/List_information

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/