[urq] Clutch Slave Problem?

[racingiron at comcast.net]

Correct Steve, clutch is behaving as if pedal is depressed. The only experience I have with slave removal is on 01E boxes, which have mounting bolts instead of the pin, and there's a little edge on the flange, allowing the cylinder to rest against clutch spring pressure before installing the bolt. Does this one have a similar edge? 

I didn't detect any movement when trying to walk it out, but I'll try it again today. The engine was not yet started when this occurred, but I did fire it up shortly afterward. 

Eric R. 
'86 urq 
'92 urS 
'93 urS