[urq] Clutch Slave Problem?

[Brandon Rogers]

No edge on these bellhousings.

Brandon 
'84 ur
 
 


-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of racingiron at comcast.net
Sent: Tuesday, September 07, 2010 4:25 AM
To: urq
Cc: urq at audifans.com
Subject: Re: [urq] Clutch Slave Problem?


Correct Steve, clutch is behaving as if pedal is depressed. The only
experience I have with slave removal is on 01E boxes, which have mounting
bolts instead of the pin, and there's a little edge on the flange, allowing
the cylinder to rest against clutch spring pressure before installing the
bolt. Does this one have a similar edge? 

I didn't detect any movement when trying to walk it out, but I'll try it
again today. The engine was not yet started when this occurred, but I did
fire it up shortly afterward. 

Eric R. 
'86 urq 
'92 urS 
'93 urS 

_______________________________________________
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
http://www.audifans.com/kb/List_information

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/