[urq] MC1 block & head with WX externals (smog)

[Johnny B]

Hey Steve,

I appreciate the input. I had figured I would be swapping the block & head only, all external bits (including the water inlet) would remain stock from the WX. I'll take a closer look at what I have to work with this evening. 

Johnny

> To: pre95 at live.com; urq at audifans.com
> From: urq at pacbell.net
> Date: Fri, 17 Sep 2010 09:56:19 -0700
> Subject: Re: [urq]	MC1 block & head with WX externals (smog)
> 
> Yes ... but you may have problems if you leave the unconnected temp sensors in the upper coolant hose flange.  
> 
> With the full conversion including the MAC11/14 the car should be even better WRT emissions, but then you will need to do the referee thing, and Andrew's horror story has me quite gun shy ...
> 
> Steven Buchholz (mobile)
> 
> ----- Reply message -----
> From: "Johnny B" <pre95 at live.com>
> Date: Fri, Sep 17, 2010 7:39 am
> Subject: [urq] MC1 block & head with WX externals (smog)
> To: "urq" <urq at audifans.com>
> 
> 
> Will an MC1/2 block & head combo smog in california if ran on WX CIS w/ WX exhaust & intake manifolds? Insight greatly appreciated! I know some have commented you can run an MC block & head with WX externals but I am unsure if this has any adverse effects on smoggability. 
> 
> TIA
> 
> Johnny
>  		 	   		  
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
> 
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
> 
> 
> 
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
> 
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
>