[urq] cooling fan issues

[Jim Miller]

Thanks for the responses on my filter questions! Got all that taken care of.
Now, another issue. Flushed the old coolant, fresh coolant added, new thermostat, new 2-pin temp switch and a few new hoses. All good. Got the engine up to temp and the radiator fan would not switch on. Now, I do have the highspeed manually switched and it worked... for a while. I did not keep in running for a long timeI re-checked the thermostat alignment per the manual. I hooked up a jumper wire from the battery and tested the fan. It works. Checked the fuses, the relays and the connectors on the back of the fuse panel. All checked out. I know this subject has been covered many times, so I appreciate any insight to a remedy!
Thanks!
Jim Miller
'83 Urq