[urq] Clutch for 3B into 016 urq

[Brandon Rogers]

I ran a stock 200 clutch for several years and it did great - this on a
somewhat RS2'd 3B in my [former] '84.  During a transmission swap I decided
to upgrade (while I was in there, of course!) to  Stage 2 South Bend clutch.
It had factory feel but reportedly had ~20% more clamping power. I think it
was $595.  A cool part is they will rebuild their stuff - long story short I
had then rebuild the pressure plate, clutch plate and resurface the flywheel
during a subsequent tranny swap and it was very reasonable.

HTH

Brandon 
 
 

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of c1j1miller at aol.com
Sent: Thursday, September 13, 2012 6:57 AM
To: urq at audifans.com
Subject: [urq] Clutch for 3B into 016 urq

Looking for a clutch recommendation.  I find the cheapest to be a stock 200q
clutch from LUK at under $300.  Sachs about $550.

Seems that Sachs has an uprated clutch and pressure plate 883082 999707 and
881861 999875.  Lots more $$.

Starting with stock 3B and chipped ECU.  Thoughts and sources?  

Chris

--
Chris Miller, Brewster MA
c1j1miller at aol.com

_______________________________________________
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
http://www.audifans.com/kb/List_information

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/