[V8] Hall Sensor [was cam speed sensor]

[William Gutierrez]

Hi,

Following up on an earlier post.  If you will recall, a hook up on the VAG 
computer gave a code of "Cam Position Sensor" failure.  I have since deduced 
that this means a faulty message from the Hall Sensor.  I tried to search 
the archives for information on this item, but without success.

First, is there a definitive way to test the sensor to make sure the code 
reading is correct and I have the right sensor?  Second, I understand the 
sensor is in the right distributor.  Can the sensor be purchased separately, 
or do I have to get another right distributor if it is bad?  Third, I recall 
a discussion that the right distributor on the V8 PT might be 
interchangeable with another in the VW range.  Any BTDT's on that concept?  
Finally, is this a repair I can make myself, or should I leave it to someone 
who knows.

Thanks in advance.

Bill Gutierrez
1990 V8 5spd.

_________________________________________________________________
Is there a gadget-lover on your gift list?  MSN Shopping has lined up some 
good bets!  http://shopping.msn.com