[V8] Time for a new project, old project must go!

[Jeremy Ward]

Al Swackhammer is selling his killer track car (see specs below) to
start a new project.  He wants to stuff 2 more cylinders into his '96
A6...  Can you blame him?

He is looking for a 4.2l (V8/A8) donor with a good motor (duh), ecu,
wiring harness, etc.  He is also looking for a buyer for his track car
and/or trailer (or perhaps as trade for the donor).  Al is located in
Washington State.

If you have any leads for him or advice for his conversion, please drop
him an email.

And I thought *we* were obsessed with power...  Look at those specs!
<drool>

- Jeremy


-----Original Message-----
From: Al Swackhammer [mailto:a.swackhammer at comcast.net] 
Sent: Monday, February 16, 2004 6:54 PM
To: Jeremy Ward
Subject: Re: 4ktq for 4.2l

FOR SALE
'84' 4KTQ w/TRAILER
$6500
Al Swackhammer 206-546-3313 or a.swackhammer at concast.net 
 Head work:
Large exhaust valves
276 Schrick cam, dry filmed coated w/ solid lifters
Machined for stock brake booster pump
Pressure pop off valve on intake manifold
Ceramic coated intake
Adjustable cam gear
Engine JT  block:
Ceramic coated piston tops and dry filmed coated skirts
0 gapped rings, (Total Seal)
Dry filmed coated wrist pins
Clutch: Centerforce, custom w/pressure plate and disk.  Built for 375 HP
Suspension:
Solid sub-frame bushings made of aluminum
Control arm bushings made of delrin
Koni adjustables on all four corners
Stock '84' springs
Ronal 15X7 magnesium wheels w/ 225-50-15 Yokahama A032A tires
Rebuilt (taken apart and new grease) CV joints X10
Steering tie rod ends moved to top of struts 
Rear sway bar
Exhaust:
Custom 3" from down pipe back w/5' chromed tip
Exhaust manifold and down pipe ceramic coated
Brakes:
DPI recirculation system w/ adjustable bias valve.  Steel braided lines.
Pedal pads for foot traction
Cooling: Custom 4 row R core radiator w/cooling fan.
Custom Spearco Intercooler
Custom roll cage
Custom Momo drivers seat w/Simpson 5 point harness.  Adjustable track.
Too many gauges, but very helpful.
Trailer:   
Dual axle with brakes, winch, load leveling hitch.
Diamond plate aluminum storage box.
20' X 20' canopy