[V8] Re:V8] Removing lock knobs

[Ed Kellock]

I just pulled and reinstalled my door panel yesterday afternoon
without removing the lock knobs.  It seemed to present no challenge
whatsoever to do so.  Based on my experience it is a step that can be
skipped.

Ed


On Mon, 15 Nov 2004 23:37:18 EST, suffolkd at aol.com <suffolkd at aol.com> wrote:
> Bill:
> Turn them either 90 or 180 degrees then pull straight up if they are like the
> type 44's 100/200 etc.........
> In this photo:
> http://www.quattro123.com/Audi200WindowRepair/799LockPullOrientationA.jpg
> You'll see two pictured.  One installed and the other angled to the camera
> with the notch "V" pointed out in white.
> They align as the threaded rod has a groove on it.  Twist 90 degrees and the
> threads "catch"
> HTH - Scott by BOSTON
> 
> > From: "William Gutierrez" <>
> > Sorry, this may seem like a dumb question, but how does one remove the
> > plastic lock knobs in order to remove a door panel, without permanently
> > destroying the lock knob?
> > TIA
> >
> 
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!
>