[V8] RE (10): Brake Sensor

[cobram at juno.com]

 "Campozano, Robert" <RCAMPOZANO at mgmmirage.net> writes:

> On the Girling equipped V8 it's the same as the UFO's (bare wire
> embedded in the pad).  

Not the same in that the sensor comes imbedded in the non-UFO pads, and
is a $eparate item in the UFO setup.  
That's why you should never let UFO's go too long after the indictor
light comes on, you'll eat the $econd sensor wire and some relatively
expensive disks if you go tooo long.  On that note, I've never replaced
both wear sensors on V8Q #2 (UFO's), jumped one side, has never been a
problem because the pads wear very evenly

BCNU,
http://www.geocities.com/cobramsri/