[V8] V8 No start Part II

[dsaad@icehouse.net]

Remove a pluge wire and see if you have a spark, and verify you have fuel
pressure. Back to basics....


Dave

Quoting Eric Devansky <edevansky at gmail.com>:

> I finally had some time to check out the pin out's on the ECU for the
> resistance values on my '91 V8Q. From pin 48 - 49 I am getting 982, and from
> pin 47-48 I am getting 974. Both resistance values check out on the speed on
> reference sensors as well.
>
> The car cranks, the tach does not bounce, the RPM sensor, and DME relay have
> been replaced.
>
> I am afraid now it is going to be the DME, is there any way to bench test
> the DME? What does a new one run?
>
> Thanks for the help!
> ~Eric
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>