[V8] Rear Brakes - V8Q - revisited

[Ingo Rautenberg]

Don't do it that way -- won't work.  Audi rear brakes require turning
clockwise to turn in due to the parking brake mechanism.  Harbor freight has
a kit that is avaialble at their stores if you have one close by -- makes it
easy.   Item here:
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=40732

HTH

Ingo


----- Original Message ----- 
From: "Scott Baumann / PTS Power" <scott at ptspower.com>
To: <v8 at audifans.com>
Sent: Saturday, September 03, 2005 1:03 PM
Subject: [V8] Rear Brakes - V8Q - revisited


> Hi all,
>     Located some rear pads.  Dis-assembled brake ass'y - cracked bleed
screw & put a C-clamp on the piston - seems to be stuck.  Any tricks or
things I may be missing?  The brakes a very similar to others I have done in
years past, and all have compressed with no problems.  Is this piston just
stuck tight?  If so, should I be shopping some new pistons??  Thanks
>
> SB in WI
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.10.18/89 - Release Date: 9/2/2005
>
>