[V8] Timing Belt Saga 2

Coleman, David David.Coleman at blackrock.com
Wed Sep 7 15:54:26 EDT 2005


Yes -- one deep socket and one shortie w/ 2" extensinon.  Re: access
from front, I just lay on the motor cuz I'm relatively short at 5'8".


 

> -----Original Message-----
> From: Korn, Bob [mailto:Bob.Korn at fike.com] 
> Sent: Wednesday, September 07, 2005 3:51 PM
> To: Kneale Brownson; Coleman, David; Coleman, David; 
> Buchholz, Steven; v8 at audifans.com
> Subject: RE: [V8] Timing Belt Saga 2
> 
> 8mm socket, one deep well with ratchet and one standard size 
> with short extension if  I remember correctly.  You can lay 
> the cap below the dist.
> 
> 
> Bob
> 
> -----Original Message-----
> From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com]
> Sent: Wednesday, September 07, 2005 2:30 PM
> To: Coleman, David; Coleman, David; Buchholz, Steven; v8 at audifans.com
> Subject: Re: [V8] Timing Belt Saga 2
> 
> What'd you use to undo the bolts then?  Where do you put the 
> caps with wires while removing the distributors?  
> 
> At 03:18 PM 9/7/2005 -0400, Coleman, David wrote:
> >WAIT... You don't need to remove the wires to get to the 
> bolts.  I was 
> >changing caps at the time...
> >
> >-dc-
> > 
> >
> >> -----Original Message-----
> >> From: v8-bounces at audifans.com
> >> [mailto:v8-bounces at audifans.com] On Behalf Of Coleman, David
> >> Sent: Wednesday, September 07, 2005 3:17 PM
> >> To: Kneale Brownson; Buchholz, Steven; v8 at audifans.com
> >> Subject: Re: [V8] Timing Belt Saga 2
> >> 
> >> > Since the distributors have to come off anyway to attach
> >> the locking
> >> > plates,  (remember, this is a new experience for me), it 
> looks as 
> >> > though I need to remove the plug wires to get to the little
> >> bolts that
> >> > hold on the distributor covers.
> >> 
> >> I marked the wires w/ white-out and took a picture of each side.  
> >> Belt and suspenders.
> >> 
> >> 
> >> > I'll forego the valve cover procedure for now, I guess.  As I 
> >> > understand it, the locking plates only go on if the alignment is 
> >> > correct???
> >> 
> >> Yup.
> >> 
> >> THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY 
> ATTACHMENT MAY BE 
> >> PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM 
> >> DISCLOSURE. If the reader of this message is not the intended 
> >> recipient, you are hereby notified that any dissemination, 
> >> distribution, copying or use of this message and any attachment is 
> >> strictly prohibited. If you have received this message in error, 
> >> please notify us immediately by replying to the message and 
> >> permanently delete it from your computer and destroy any printout 
> >> thereof.
> >> _______________________________________________
> >> Audifans V8 mailing list
> >> Send posts to: mailto:V8 at audifans.com Manage your list connection:
> >> http://www.audifans.com/mailman/listinfo/v8
> >> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> >> http://www.audifans.com/twiki/bin/view/Audi/V8
> >> Have a V8 answer? ... Please help others by adding to the 
> KB ... all 
> >> contributions welcome!
> >> 
> >
> >THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE 
> >PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM 
> >DISCLOSURE. If the reader of this message is not the intended
> recipient, you 
> >are hereby notified that any dissemination, distribution, copying or
> use of 
> >this message and any attachment is strictly prohibited. If you have
> received 
> >this message in error, please notify us immediately by 
> replying to the 
> >message and permanently delete it from your computer and destroy any 
> >printout thereof.
> 
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: 
> http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB 
> ... all contributions welcome!
> 

THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM DISCLOSURE. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this message and any attachment is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and permanently delete it from your computer and destroy any printout thereof.


More information about the V8 mailing list