[V8] Radio removal

[Michele_Deltergo at KeyBank.com]

1) locate spare coat hanger
2) snip 2 x 8 inch pieces from longest straight section
3) curve each piece into a "U" with ~1.5inches distance between each "U"
tip
4) insert each end of "U" into holes on each end of head unit
5) with about 1 inch of hanger inserted lever rest of "U" outward from
radio while "pulling" on hangers.
6) alternately just lever one-sided of hanger outward with other index
finger inserted in tape player gently pulling unit outward.  Once one end
is released repeat with other end
7) hope that some kind sole wrote the code of the radio on it so when you
disconnect the power you have it to repower!
Mike

)from Message: 8
Date: Fri, 17 Feb 2006 13:44:39 -0500
From: "Coleman, David" <David.Coleman at blackrock.com>


Does anyone have a link to a quick-n-easy method to remove the factory
head unit?

DaveC.
'91 V8 5-sp



*******************************************************************************
This communication may contain privileged and/or confidential information. It
is intended solely for the use of the addressee. If you are not the intended
recipient, you are strictly prohibited from disclosing, copying, distributing
or using any of this information. If you received this communication in error,
please contact the sender immediately and destroy the material in its entirety,
whether electronic or hard copy. This communication may contain nonpublic
information about individuals and businesses subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose
such information for any purpose other than to provide the services for which
you are receiving the information.

127 Public Square, Cleveland, OH 44114
*******************************************************************************


If you prefer not to receive future e-mail offers for products or services from
Key send an e-mail to DNERequests at key.com with 'No Promotional E-mails' in the
SUBJECT line.