[V8] track F/R and fun stuff.....:-)

[QSHIPQ at aol.com]

I like drawings!  I don't like heim joints on type 44, or any street  car for 
that matter.  They fail, and often.  The rear camber links of  the type 44 is 
a sealed heim joint, and it fails regularly
 
The one I designed up for the LT1Q application (never built), just used a  
standard issue cromoly control arm from Summit racing (camaro app  IIRC).   
 
For track, this will certainly be a good setup however.
 
SJ
 
 
In a message dated 4/18/2007 11:39:31 A.M. Central Standard Time,  
ron_01056 at yahoo.com writes:

Scott, I  know you post over on motorgeek
sometimes..have you seen  this?
http://www.motorgeek.com/phpBB2/viewtopic.php?t=11425

Just  brows through it a bit & you'll see on page 3
haydn's reworking of the  front suspension. There are
plenty of other pics of what he has in mind  scattered
on the rest of the pages of his thread.
Not asking you to look  at the whole thread....but take
a glance on page 3.

What do you  think?

Ron


 



************************************** See what's free at http://www.aol.com.