[V8] Glovebox Removal? (Ignition switch & heater core R&R)

[cobram at juno.com]

 "urq" <urq at pacbell.net> writes:

> In my case I'm pretty sure the problem is in the lock module ... the 
> key  still works to engage the column lock.  I want to remove the key 
> cylinder from the lock that is there and plug it into the new module I
have.  
> It seems like all I should need to do is to find the screw that holds 
> the lock module to the column and it should come right off.  As I noted
in 
> the other response, I'm thinking I might just go ahead and go by the
book ... 
> pulling the wheel and column switches isn't that big a deal ... if only
I 
> could get the glovebox out!  I'm thinking a clear mind and a small
mirror will 
> tell me what soret of drive I need to get the glovebox out ...

I posted a few pics.  Check them out before this image hosting site
disappears with the rest of them....
All you have to do is back out the two slotted micro screws and the
switch will slide right out.