[V8] Coolant Guage wackyness
Ron Wainwright
ron_01056 at yahoo.com
Tue Jul 3 22:15:17 EDT 2007
I'm going to look at the Sensor at the back of the
pass side head tomorrow. I got a few good ones I can
swap, & see what that does.
Ron
--- Kneale Brownson <knealeski at sbcglobal.net> wrote:
> I don't recall specifics, but I seem to remember
> Keith providing a longish explanation of how the
> gauge gets the coolant temperature report from a
> couple different sensors in the coolant system.
> Isn't there one on the radiator and another on the
> back of the passenger side head? One or both supply
> the signal to the gauge in the instrument cluster?
>
> Ron Wainwright <ron_01056 at yahoo.com> wrote: Sending
> Unit Kneale???
>
> Ron
>
> --- Kneale Brownson wrote:
>
> > How about the sending unit itself?
> >
> > Ron Wainwright wrote:
> > Lister's, just trying to figure out if the
> processor
> > in the Instrument Cluster is fubar...or what......
> >
> > Here's what's happening....the coolant guage
> needle
> > was sitting at 110C..car off, cold,
> hot.....doesn't
> > matter. So I took the IC out & replaced the
> coolant
> > guage itself. I go to hook the #2 Black connector
> at
> > the back of the cluster & the needle goes from
> 50C,
> > to
> > 110C. I unplug the Black #2 connector & it goes
> back
> > to 50C.....is the processor fubar?? wire in the
> > cluster?.....any suggestions?
> >
>
____________________________________________________________________________________
Park yourself in front of a world of choices in alternative vehicles. Visit the Yahoo! Auto Green Center.
http://autos.yahoo.com/green_center/
More information about the V8
mailing list