[V8] No Start

[Ron Wainwright]

George, When you try to start the car does it crank like it wants to catch but just won't?
 Has it been sitting in the cold? Or was the car in a garage?
 What did the plugs look like that you pulled?

As far as the IGN & RPM sensors.... if you remove the connectors to test them your supposed to get 1K ohms.

 Ron


--- On Sat, 11/29/08, george.fallot at verizon.net <george.fallot at verizon.net> wrote:

> From: george.fallot at verizon.net <george.fallot at verizon.net>
> Subject: [V8] No Start
> To: v8 at audifans.com
> Date: Saturday, November 29, 2008, 10:32 PM
> Hi guys,
>     Hope everyone had a nice Thanksgiving,I did until
> today.
> The last time I used the 90V8 was Thursday morning. I went
> to 
> use it late this afternoon and now it won't start.
>      I tried to pull the codes and all I get is 4444. I
> have spark
> at cylinders 1and 5 (the only ones I checked). I also have
> gas, when I take off the return line at the presure
> regulator
> and crank the engine I have gas.
>      The engine sounds different when I crank it,almost
> like
> the timing belt is broken. I took off the left timing cover
> and 
> the belt is ok. I even cranked it until the timing marks
> that I 
> put on the belt (when I changed it 6k ago) lined up.
>      The car has 160k on it and I'm thinking that maybe
> the 
> sensor that counts the flywheel teeth is bad.Neither of
> the 2 sensors have been changed.Is there a way to check it?
>     Anybody have any ideas?
> 
>  Thanks, George
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection:
> http://www.audifans.com/mailman/listinfo/v8
> 
> You can help keep the audifans site running by shopping at
> http://audifans.com/shop/