[V8] serpentine belt

[Ron Wainwright]

I would suspect eather the tensioner damper... or the bearings in the tensioner behind the P-side t-belt cover's are sticking. You hope it's just the tensioner damper.

 Ron


--- On Sat, 9/27/08, Seamus O'Carey <cheshirecatsbox at gmail.com> wrote:

> From: Seamus O'Carey <cheshirecatsbox at gmail.com>
> Subject: [V8] serpentine belt
> To: v8 at audifans.com
> Date: Saturday, September 27, 2008, 4:26 PM
> I can't get tension on the serpentine belt.  I finally
> got it around all the
> pulleys, but there's a ton of slack in it.  I can move
> the tensioner to the
> "more loose" position, but when it springs back
> it doesn't seem to go far
> enough to tighten up the belt.
> 
> I've checked several times that I have the correct
> routing and I know I have
> the right belt because there is a diagram for the Audi 3.6L
> routing
> configuration on the packaging.
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection:
> http://www.audifans.com/mailman/listinfo/v8
> 
> You can help keep the audifans site running by shopping at
> http://audifans.com/shop/