[V8] Bearing puller

[Kent McLean]

Tony and Lillie wrote:
 > The hub is inside of the bearing, pressed into it. So, you have to pull the
 > hub from the bearing first, and usually the outer race comes off with it.
 > Then, You can pull the holding clips and th e bearing itself. They, you remove
 > the old race from the hub, put the new bearing in, and then th e hub goes 
back > in.
 >
 > Sounds simple, huh ;-)

Yeah. It makes me feel better about writing the big check.

-- 
Kent McLean
1999 A4 Avant, V6 Tiptronic
1991 200 TQA #3, with mods
soon-to-be-mine 1990 V8 w/5-speed and other mods
gone: '91 200 TQA x2, '94 100 S Avant, '89 200 TQ