[V8] window regulator clip

[Kent McLean]

Ed Kellock wrote:
> If you merely want the window up and do not want/need to have a functioning
> regulator at this time, you can unclip the window from the regulator by
> removing a c-clip from the back side of the blocky slider thingy in the
> picture.  

Thanks for the help, Ed, but No Luck. I need a smaller mirror.  I can
get a finger on (what I think is) the peg and c-clip on the back side
of the slide. But I can't feel the open end of the c-clip (which has
me thinking it is facing down where a finger can't get to it). It also
feels like there is a gap near the top, so if I get a smaller mirror
and an L-shaped tool to get into that gap to pry it off, I might get
lucky.

Sorry for the hazy picture; the flash didn't get behind the window, and
GIMP can only do so much to brighten the image.
<http://www.audifans.com/kb/File:V8_window_C-clip.jpg>

-- 
Kent McLean
1990 V8 w/5-speed and other mods
1991 200 TQA #3, with mods
1999 A4 Avant, V6 Tiptronic
gone: '91 200 TQA x2, '94 100 S Avant, '89 200 TQ "Bad Puppy"