[V8] No start, list of codes.

[Bryan Kamerer]

Tom,

I did not get near the foot pedals, but I must have done something wrong.  I
went back today and carefully went through the proceedure again, clearing
the codes first by pulling fuse #27 for a minute.  15 sec. of crank, and the
only thing blinked out was 2112, which is:

2112 Timing (62 degrees BTDC) reference sensor
>
> Flywheel pin damaged/missing,
>
> Mis-located Sensor, flywheel pin, distributor hall sensor out of adjustment
>
>

So that means replace that "ignition reference sensor" as has been
discussed, correct?

Thanks,

Bryan