[Vwdiesel] Re: Starter Motor Update

Milton Kaplan teacher525 at juno.com
Fri Mar 22 19:30:06 EST 2002


I found a new way to get the sticking solenoid to release. Since the
hammer trick doesn't work, I removed battery gnd from the post and then
removed the heavy positive red starter wire. Then reconnected battery
ground. Turning on and off the key in the start position seemed to free
up the solenoid.

While I was about to remove the starter, I see it requires an inside hex
wrench of 8mm. However the 8mm inside hex socket  (3/8 inch) will not
seat all the way into the bolt as the socket bumps the starter body. Some
special tool for this? I don't think they make a 1/4 inch 8mm inside hex
socket do they? I can't imagine using a cheap 90 degree hex wrench for
this application.


________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.



More information about the Vwdiesel mailing list