[Vwdiesel] intermediate shaft question

[Bradley Flubacher]

I've replaced a couple of these o-rings (while installing a new oil
seal) and they were always green. Sounds like you got the right one!

Brad


Matt_Lisa wrote:

> Hi all,
>
> I've been replacing the oil seals on my 1.6NA, and when it came to the
> intermediate shaft, it was a lot easier to just remove the outer cap
> and change the seal than change the seal with the cap still on the
> block.  I changed the outer seal, but in checking about putting it back
> on, bentley mentions an o-ring that goes under the cap.  I found a
> green colored o-ring in the gasket kit, but wanted to make sure this
> was the right one.  There wasn't one under there when I pulled it off.
> Instead, it looked like there was a gasket instead.  My question is, is
> there a gasket or an o-ring for this?
>
> Wow, this is confusing when it should be simple.
>
> thanks!!
>
> Matt
> http://matt_lisa.home.sprynet.com/
>
> _______________________________________________
> vwdiesel mailing list
> vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>