[Vwdiesel] How 'bout pump leaks at the throttle lever?

[Gary, Orlando]

Other Gary,

That is not a screw, it's the shaft with a reference line etched in it.

The springs are intimidating, but are workable. Once you get the top of
the pump stripped down, and you break the top seal, you will need to get
under the cover with needle nose pliers 'cause the throttle linkage
connects to the control arm with a spring clamp of sorts. This is best
done on the bench. Once you get it apart, you will see how the linkages
work together and will be easy to reassemble.

-Gary, Orlando


On Mon, 2002-12-30 at 12:06, Gary Shea wrote:
> Subject line pretty well gets it.  I wasn't too nervous about repairing
> the leak at the cold-start lever.  This one has lots of springs and
> that little tiny screw in the middle of the shaft makes me especially
> nervous.
>
> 	Gary