[Vwdiesel] Hillbilly TUNING ? ---( is it valid ? ---bet your butts. )

[James Hansen]

 ---and a beginner has not got a hope
in hell with an OLD Rabbit going by simple Bentley TIMING.
______

That would not be the most accurate thing you have ever said.
With the exception of the members of this forum that have been exposed to
this nonsense, everyone else tunes their cars using a dial indicator and the
book.
They run and drive to the level of maintenance they have been subjected to.
I get to see quite a few of them.

Contrast that to setting timing your way.
Oh, sorry, I just don't have a two weeks to set the timing on my car.  I
have 6 passenger vehicles in the fleet, four more farm trucks, eight
tractors and combines.  all diesel.
They get tuned by the book.  Haven't blown up anything yet, and funny how
they all work, and quite well if I say so myself.
Why?
Because to a diesel, timing IS tuning.  These engines are made as exactly
similar as is possible. THAT's why you can use a measurement.  This is no
carb, or fuel injection, the manufacturing tolerances on a diesel are
astoundingly accurate. Including the injection pumps, and quite frankly, if
they don't work, or are worn out, the best line of thought is to replace or
repair it, as they do have and werre manufactured with a finite duty cycvle
in mind.




Hillbilly TUNING   was a  very sophisticated way of getting Rabbits going IF
Bentley
TIMING did not work.----and let me tell you all ----a worn OLD Rabbit diesel
will NOT work
timed by Bentley  instructions.   BUT may work  if TUNED by Hillbilly
procedures ?  ---
put your money on the table ? OK ? -----

Shit you can put your DIAL and what not anywhere---BUT if the timing does
NOT advance as
you feed her fuel ? ----you are wasting your time.   ----So there you go
James ----your
dial indicator will test TIMING  (Injection point)   ?   How let us know.
_____

so setting the static timing differently will make a pump with a
non-functioning advance cam suddenly work again? bullshit.
If it's broken it needs fixing.



I did this for a lot of years---- and to debate it ? ---no problemo.-----I
am not
stubborn.
____


No not stubborn at all.
 I though you were a VW diesel newbie as of two years ago. which one is it
now, the wizened diesel expert that has many years experience, or a two year
old diesel newbie?
Stop insisting you are right. that contributes nothing to the discussion,
and that is asserting, not debating.
What is your static pump timing?  I maintain you are at or near 1.00mm
 Until you can provide a number to discuss, I consider this a waste of my
time, and as far as I'm concerned, the matter is closed.

Cheers.
-James




--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.13.13/197 - Release Date: 12/9/2005