[Vwdiesel] Head gasket and studs needed
gary
gbangs at cfl.rr.com
Mon Jul 23 17:17:16 EDT 2007
Hello Doyt,
The 12mm headbolts are the same for the 1.6 IDI and 1.9TDI engines.
The ARP bolts are a lot less expensive than Raceware, and after
installing them in my former Passat TDI, ARP is the way to go because of
the hex hole in the ends. Makes installation (at least with head still
on car) a snap.
I got my ARP's from Summit Racing... www.summitracing.com
They are listed for a Ford Cosworth Sierra 4 cyl. 12mm.
You have the correct part number.
If you google "ARP-251-4701" you will find a few places that will sell
them cheaper. But I like Summits reputation.
-Gary
Doyt W. Echelberger wrote:
> My 85 Jetta TD needs a head gasket and studs, and I'd appreciate advice on
> sourcing the parts.
>
> I wish I had used Raceware or similar non-stretch studs the last time I
> replaced this head gasket....maybe 10 years ago.
> I'm getting oil in the coolant again. That is why I replaced the first head
> gasket.
>
> Researching the archives reveals Sandy, Gary and Nick talking about ARP
> 251-4701 head studs being as good as Raceware at a better price. But maybe
> they were talking about studs for a TDI.
>
> Google search shows this part number for a 4 cylinder Ford block.
>
> All my search results for ARP show only the VW 1.8 engine.
>
> I want to get the right studs, and would appreciate a part number (for my
> 85 Jetta TD) from someone who used the ARP's and who knows they worked.
>
> Anybody used these studs on a 1985 1.6 TD?
>
> Doyt Echelberger
>
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>
More information about the Vwdiesel
mailing list