[Vwdiesel] [Audi-VW-Diesels] Wheel Bearing--Inner Race stuck to hub (fwd)
LBaird119 at aol.com
LBaird119 at aol.com
Wed Sep 10 08:52:02 PDT 2008
> I discourage using a chisel. Not a good idea. Bearing race is too
> hardened,
> and there's lots of shrapnel. Not to mention you will dull your chisel
> several times.
>
The ONLY way to use a chisel whatsoever, for this application
is as a wedge! You still have to watch for chips and bits but
if you don't have an oxy/acetylene torch... Alternating across
the bearing, one lick at a time, drive the chisel between the
bearing race and the hub.
As James said, wear heavy clothing, protection, etc and this
does work slowly and reasonably safely. Don't ever try and
split a race with a chisel though. At least one of these wheel
bearing races. :-o
Loren
**************
Psssst...Have you heard the news? There's a new
fashion blog, plus the latest fall trends and hair styles at StyleList.com.
(http://www.stylelist.com/trends?ncid=aolsty00050000000014)
More information about the Vwdiesel
mailing list