[Vwdiesel] Hot to fill injection pump when it is off the car.

[Andrew .Libby]

If you replace the OUT bolt with a spare IN bolt, the stick the fuel INlet
in the bottle and pull a vac on the OUTlet it will work even easier than
trying to pour it in.  I'm trying to come up with a reason to fill the pump
one the bench, tho...  Are you wanting to store the pump with it full?


On Sun, Apr 6, 2014 at 9:51 AM, <lbaird119 at aol.com> wrote:

>
>   Remove the "OUT" banjo bolt and fill through that hole.  There's a
> restrictor hole in that bolt that'll keep you from filling it without
> removing that bolt (in any reasonable amount of time anyway!)
>     Loren
>
>
>
> -----Original Message-----
> From: ken1 <ktzkarz at embarqmail.com>
> To: vwdiesel <vwdiesel at vwfans.com>
> Sent: Sun, Apr 6, 2014 9:41 am
> Subject: [Vwdiesel] Hot to fill injection pump when it is off the car.
>
>
> How do I do this? I tried to suck it thru the pump by placing filtered
> line in
> ottle of ATP and connecting to the input and then putting mityvac on
> output and
> umping it. Did not work.Tried to use a syringe to fill thru the input,
> nope.
> ried to use syringe and fill thru output, nope. At a loss. Thanks.
> --
> 982 caddy 1.6L NA running
> 967 convertible bug running
> 980 caddy project
> 991 2 door Jetta TD restoration in progress
> ______________________________________________
> wdiesel mailing list
> wdiesel at vwfans.com
> ttp://www.audifans.com/mailman/listinfo/vwdiesel
>
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>