[Vwdiesel] Was injection pump timing

[lbaird119 at aol.com]

Should be good unless someone swapped flywheels on you.
  Be SURE you had the cold start knob in (or that your cold advance is released) when you set the timing or else it'll show as too advanced, because it IS advanced.  Also make sure the lever is fully to the non-advanced position when the advance is in the normal position.  Something that was always somewhat stressed at the dealer...
    Loren



-----Original Message-----
From: ralph meyermann <ralphmeyermann at gmail.com>
To: Mark Shepherd <mark at shepher.fsnet.co.uk>
Cc: vwdiesel <vwdiesel at vwfans.com>
Sent: Sun, Jan 26, 2014 12:51 pm
Subject: Re: [Vwdiesel] Was injection pump timing


I fired it up today after double checking and seeing 1.0 mm. Running rough
nd really smoky?? I may have to double check pressure plate timing mark to
ctual tdc?
Velma 82 1.9L AAZ td westy