[Vwdiesel] Was injection pump timing

[ralph meyermann]

The flywheel and clutch assembly is off my 1.6 na

Velma 82 1.9L AAZ td westy
On Jan 27, 2014 1:58 AM, <lbaird119 at aol.com> wrote:

> Should be good unless someone swapped flywheels on you.
>   Be SURE you had the cold start knob in (or that your cold advance is
> released) when you set the timing or else it'll show as too advanced,
> because it IS advanced.  Also make sure the lever is fully to the
> non-advanced position when the advance is in the normal position.
> Something that was always somewhat stressed at the dealer...
>     Loren
>
>
>  -----Original Message-----
> From: ralph meyermann <ralphmeyermann at gmail.com>
> To: Mark Shepherd <mark at shepher.fsnet.co.uk>
> Cc: vwdiesel <vwdiesel at vwfans.com>
> Sent: Sun, Jan 26, 2014 12:51 pm
> Subject: Re: [Vwdiesel] Was injection pump timing
>
> I fired it up today after double checking and seeing 1.0 mm. Running rough
> and really smoky?? I may have to double check pressure plate timing mark to
> actual tdc?
>
> Velma 82 1.9L AAZ td westy
>
>