[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Cam cover gaskets

To: quattro@coimbra.ans.net
Subject: Re: Cam cover gaskets
From: bbell@csn.net (Bruce Bell)
Date: Fri, 21 Apr 1995 14:39:03 -0600
Sender: quattro-owner@coimbra.ans.net

I like the rubber gasket best also. Pay attention though. the holes in some
gaskets are larger than others. 4mm vs 6mm I think. this is to accomodate
two different stud designs. One has a larger shoulder to to prevent
mechanics from over-tightning the valve cover and crushing the gasket. If
you use the wrong gasket, as I did, then you could have a quart or two of
oil on the floor real quick. 

Bruce

bbell@csn.net (Bruce Bell)

Prev by Author: Re: Euro lights group purchase
Next by Author: Re: RPM Limiter
Prev by thread: Re: Cam cover gaskets
Next by thread: Water pump drive gear
Index(es):
- Author
- Thread