Re: Seat Heater light/Soloman Ngan

["Solomon Ngan" <sngan@netaccess.on.ca>]

Hi Nick,
Each individual switch on the center console is removeable.  Just 
insert a small screw driver from the top of the switch and pry out 
carefully.
Eg, the heated-seat switch consists of a outer trim.  You insert the 
slot-head screw driver from the top and pry out.  After that, the 
switch is exposed.  Use a long-nose plier to pull out the switch.  
Then carefully pull out the switch from the connector at the back.
After that, follow instruction given by Joe a few days ago.  If you 
don't have it I will rewrite the instruction for you.
It is actually quite easy.  The switch would be totally removed and 
in my hand in 30sec.

Other switches on the center console may not have an outer trim.  In 
that case, just pry out the entire switch.  They are held in position 
by a pair of spring clips.  So you won't damage anything.

Let me know if you need more help.


_________________________________

Solomon Ngan <sngan@netaccess.on.ca>
  '93 100s
  '90 90q20v