RE: EC article & ad for Eurospec stroker kit

[Bruce Bell <bbell@csn.org>]

At 01:20 AM 3/22/96 -0400, you wrote:

>On my 89 10v going into an 82tqc I've done about the same as you.
--snip--
>I also looked into the Eurorace stroker kit but came to the same
conclusions as you. That's why I'm interested in the VW crank setup. Any
thoughts on how I can "stroke" the motor with redoing the head.
>Would I have to replace the rods and pistons or can I  get away with just
reworking  the stock pistons.

You will need to do the whole short block. Think your rods are OK, but you
will have to replace pistons. If you were using the Ur-Q motor you couldn't
even consider this since crank journals are different. 

Think you and glen made a wise decision on the eurorace kit.

Bruce Bell
bbell@csn.net