[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Replacing knock sensor - dealer?

Preston Brown writes:
> [ ECU fault diagnosis indicates knock sensor or knock sensor wiring ]
> But how do I know if it is the sensor or the 
> wiring?

Before you replace anything, you might want to check the knock
sensor mounting bolt torque.  These sensors are sensitive
to the torque and it must be correct...

-Ti
-- 
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Research Laboratories, Sunnyvale, CA. USA
  ///    Internet: ti@amb.org
 //////  UUCP:     ...!uunet!bazooka!ti
///      URL:      http://sunsite.unc.edu/~cddb/tikan/