[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Dash Cluster
John \"Magnus\" Altinger writes:
> I'm getting peeved! I have an 84 5000s, and I want to yank the cluster so
> I can replace the bulb behind my digital clock! (Yeah yeah... its not
> exactly dire maintenance.) I yank off the steering wheel, remove the two
> screws holding the cluster it, and pull. I get it about 80% of the way
> out, but something is holding it back. I dont want to pull TOO hard, or I
> have a feeling the Audi Gods might whip a thunderbolt from above!
> Is it just a matter of yanking on it?
> On my 1988 Audi 90, it just slid out, no problem.
In the 84 5000 (non turbo), there is a speedometer cable attached
to the back. You need to unscrew that first...
-Ti
--
/// Ti Kan Vorsprung durch Technik
/// AMB Research Laboratories, Sunnyvale, CA. USA
/// Internet: ti@amb.org
////// UUCP: ...!uunet!bazooka!ti
/// URL: http://sunsite.unc.edu/~cddb/tikan/
- References:
- Dash Cluster
- From: "John \"Magnus\" Altinger" <altinger@max-net.com>